Dyson Vacuum Cleaner Problems & Troubleshooting

Dyson vacuum cleaners are some of the most popular on the market, but they can also be quite expensive. When you invest in a Dyson, it’s important to know how to troubleshoot any problems that may arise.

In this blog post, we’ll discuss some of the most common issues with these vacuums and offer solutions to help you get your machine up and running again.

Dyson Vacuum Cleaner Not Working

If your Dyson vacuum cleaner is not working, the first thing you should check is whether it is plugged in and receiving power. If it is plugged in and receiving power, the next thing to check is the fuse box.

If there are no blown fuses, you may need to call a technician to investigate what could be wrong with your vacuum cleaner.

Dyson Vacuum Shuts Off After a Few Minutes

If your Dyson vacuum won’t stay on, it is likely there might be a problem with the thermal protector. Vacuum cleaners are equipped with a thermal protector to prevent the motor from overheating.

If the thermal protector is faulty, it will cause the vacuum cleaner to shut off after a few minutes.

If your Dyson vacuum cleaner is shutting off after a few minutes, I suggest taking it to an authorized Dyson dealer for service. They will be able to determine if the thermal protector is faulty and replace it if necessary.

Dyson Vacuum On-Off Switch Not Working

If your Dyson vacuum’s on-off switch isn’t working, there could be a few different reasons why. Here are a few things to check:

  • Make sure the vacuum is plugged in. If it isn’t, the switch won’t work.
  • Check to see if the switch is stuck in the “on” position. If it is, try unplugging the vacuum and then plugging it back in. This should reset the switch.
  • If neither of those things work, there could be an issue with the wiring inside the vacuum. You’ll need to open up the vacuum and examine the wiring to see if anything looks loose or damaged.

Dyson Trigger Not Working

Sometimes when this happens, it’s because the trigger is dirty and needs to be cleaned. If you’re comfortable taking the vacuum apart, you can try cleaning it yourself.

If not, I would recommend taking it into a Vacuum Repair Shop to have them take a look at it.

Dyson Vacuum Won’t Turn Off

First, check to make sure the vacuum is plugged in and that the outlet is working. If it is plugged in and the outlet is working, try pressing the power button on the vacuum to turn it off.

If the vacuum still doesn’t turn off, you may need to call Dyson customer service.

Dyson Vacuum Won’t Turn On

Dyson vacuum won’t turn on in an upright position

Chances are the vacuum cleaner is not in the “off” position. Try pressing the red “off” button on the top of the machine to see if it will turn on. If it still doesn’t work, it may be time to call customer service.

Dyson vacuum won’t turn on after cleaning the filter

There are a few things you can try if your Dyson vacuum cleaner won’t turn on after cleaning the filter.

First, make sure the filter is clean and free of debris. If it is, try pressing the reset button on the back of the machine.

If that doesn’t work, check to see if there’s a blockage in the hose or if there’s something caught in the fan blades. If everything looks okay and it still won’t turn on, you might need to have it serviced.

Dyson Overheating

There are a number of reasons why your Dyson might be overheating.

Firstly, make sure that it is placed on a level surface and that the air intake and exhaust vents are clear.

If the machine is still overheating, then it could be due to a blockage in the airflow system. Try removing and cleaning all of the filters, including the HEPA filter. You should also check for any dirt or debris build-up around the motor compartment.

If your Dyson is still overheating after taking these measures, then you may need to contact customer support for further assistance.

Dyson overheating reset

To reset a Dyson vacuum, you will need to unplug the machine and remove the dirt canister. Next, locate the red reset button on the back of the machine and press it with a pen or paper clip.

Finally, plug in the machine and turn it on. You should now be able to use your Dyson as normal.

Dyson Powerhead Keeps Stopping (Turning Off)

More often than not, if your Dyson Powerhead keeps turning off, it’s because the filter needs to be cleaned. Over time, dust and dirt will accumulate on the filter, which can eventually cause the vacuum to lose suction.

When this happens, the motor will overheat and shut off automatically.

To clean the filter, simply remove it from the vacuum and wash it with warm water (don’t use soap). Allow it to air dry completely before putting it back in.

If your Powerhead still isn’t working after cleaning the filter, you may need to replace it.

Dyson Vacuum Not Charging

You may be like ‘Help! My Dyson won’t charge!’

Well, if this is your problem, it sounds like your vacuum may be experiencing a power issue. There are a few things you can do to try and fix the problem:

  • Check to make sure the vacuum is properly plugged into an outlet.
  • Try charging the battery in a different outlet.
  • If you have another Dyson vacuum, try using the same charger on the other vacuum to see if it works.

If these tips don’t work, it may be time to call in for some help. Dyson customer service should be able to assist you in diagnosing and fixing the issue.

Dyson Flashing Lights (Red, Green, Blue)

Dyson red light flashing 32 times

If you have a Dyson vacuum cleaner and the red light is flashing 32 times, it means that the machine has identified a blockage. The red light will stop flashing when the blockage has been cleared.

To clear a blockage, please follow these steps:

  1. Unplug the machine and turn it upside down.
  2. Remove the brush bar and check for any debris that may be wrapped around it.
  3. Clean out the House/ rotating assembly if necessary.
  4. Replace all parts and plug the machine in again to test.

Dyson flashing green light

If you’re seeing a flashing green light on your Dyson vacuum cleaner, it indicates that the brushroll is jammed.

To clear the jam, follow these steps:

  1. Turn off your vacuum cleaner and unplug it from the power outlet.
  2. Remove the Bottom Plate Assembly by pressing the release button and pulling down on the lever (on models DC40, DC41, DC65, and Up14 only).
  3. Remove any hair or debris that’s wrapped around the brushroll. To clean out any stubborn dirt or debris, use a small coin to carefully twist the bottom of the brushroll clearing tool (located under the Bottom Plate Assembly) in a counter-clockwise direction.

Dyson Vacuum Losing Suction

Dyson Ball Vacuum no suction from base

If your Dyson Ball Vacuum isn’t suctioning from the base, it could be due to a few different reasons. The most common causes are that the vacuum is clogged or that there’s something blocking the hose.

First, try unplugging your vacuum and turning it over. Look for any visible clogs in the dirt cup, dustbin, or hose. If you don’t see any clogs, try using a broom handle or other long object to clear out any blockages in the hose. Once you’ve cleared out any blockages, plug your vacuum back in and test it again.

If the vacuum is still not suctioning from the base, there may be something blocking the intake at the bottom of your Dyson Ball vacuum.

Check to see if there is any dirt, dust, or debris clinging to the sides of the vacuum or lodged inside the crevice where the hose connects to the canister. If there is, use a small brush or your fingers to dislodge it, and then try vacuuming again.

Why is my Dyson vacuum not picking up?

There are several reasons why your Dyson vacuum might not be picking up dust and dirt. The most common problems are a clogged filter, a dirty brush bar, or a defective motor.

If your filter is clogged, you can try washing it in hot water and then letting it dry completely before reinstalling it. If your brush bar is dirty, you can try cleaning it with a toothbrush or other small brush.

If your motor is defective, you will need to have the vacuum serviced by a technician.

Dyson Vacuums’ Brand-Specific Problems

Dyson Animal stopped working

If your Dyson Animal has suddenly stopped working, there are a few things you can do to troubleshoot it:

-Make sure the vacuum is plugged in and that the power is on.
-Check that the dustbin is empty and clean.
-Try pressing the reset button on the bottom of the vacuum.
-Remove any obstructions from around the brushes and inside of the vacuum cleaner.
-If all else fails, take it to a service center for repairs.

Dyson DC41 won’t turn on

Try resetting the machine. If that doesn’t work, please contact their customer care team.

Dyson V8 won’t turn on

If your Dyson V8 won’t turn on, check the following:

  • Make sure the battery is properly inserted and locked in place.
  • Check that the blue LED light on the machine is lit up when you press the power button. If it’s not lit, there may be an issue with your power supply.
  • If you’re using the Quick Release Extension Hose, ensure that it’s properly click-locked into place at both ends.
  • If your machine still won’t turn on, please contact our Customer Service team for further assistance.

Dyson V11 won’t turn off

If your Dyson V11 vacuum won’t turn off, there are a few things you can try to fix the issue. First, check to make sure that the vacuum is properly plugged into an outlet.

If it is, then unplug the vacuum and plug it back in. This will sometimes reset the vacuum and allow it to turn off properly.

If that doesn’t work, try holding down the power button for 10 seconds. This will also sometimes reset the vacuum and allow it to turn off properly.

If neither of those alternatives fixes the issue, then you may need to take your vacuum to a certified Dyson service dealer for further assistance.

Dyson V11 stopped working

I’m sorry to hear that your Dyson V11 stopped working. Here are a few troubleshooting tips that may help get it up and running again:

  • Check that the bin and cyclone are properly assembled. If they’re not, the vacuum won’t be able to work properly.
  • Empty the bin and clean the filters regularly. A full bin or dirty filters can cause the vacuum to lose suction power.
  • Make sure nothing is blocking the airways. Doing a deep clean of all attachments can help remove any blockages.
  • If the vacuum still isn’t working after trying these things, you can contact Dyson customer service for further assistance.

Dyson V10 3 blue lights no power

It sounds like your Dyson V10 might not be getting power. There are a few things you can check to try to fix the issue.

First, make sure that the power cord is plugged in all the way to the outlet and that the outlet is working. If it’s still not getting power, try plugging it into a different outlet.

If it’s still not getting power, there might be something wrong with the cord or with the vacuum itself. In that case, you might need to take it in for repairs.

Dyson V7 not working

It’s possible that there is something lodged in the vacuum cleaner that is causing it to not work properly. If you’ve tried cleaning it out and it’s still not working, then you may need to take it to a service center for further inspection.

Dyson V7 battery problems

There have been some reports of battery issues with the Dyson V7 vacuum cleaner. It is important to note that these problems are relatively rare and that most people who have purchased this vacuum have been very satisfied with its performance.

That said, if you are experiencing battery problems with your Dyson V7, there are a few steps you can take to try to resolve the issue.

First, make sure that you are using the correct type of battery. The Dyson V7 should be used with a 21.6V lithium-ion battery. You can find this type of battery at most hardware stores or online retailers.

If you’re using the correct type of battery and you’re still having trouble, try resetting the device. To do this, remove the battery and hold down the power button for 30 seconds.

This will reset the internal components and may fix any issues you’re experiencing.

READ ABOUT: What type of vacuum is better?

Leave a Reply

Your email address will not be published. Required fields are marked *